Modern fuel additive for
improved and smoother acceleration and throttle response in
the partial load range. Increased driving pleasure due to
higher power utilization. The engine starts easier and runs
smoother. Compatible with all gasoline and additive qualities.
Noticeably improves acceleration – simply add to gasoline.
Operational area: For all 2-stroke and 4-stroke
engines. Sufficient for up to 70 ltrs. of gasoline.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
250ml 250ml
1368 1368
6 6
3720 2848
RACING 4T MOTORBIKE
ADDITIVE
Breaks down residues in valves
and the combustion chamber. Keeps the engine clean and
enhances engine performance. Reduces petrol consumption and
exhaust gases and therefore compatible with the environment.
Outstanding corrosion protection even when the engine oil is
overwintered. Tested for compatibility with catalytic
converters.
Operational area: Added to fuel for all 4-stroke
motorbike engines (aspirated and injection). 125 ml is
sufficient for 15 to 20 litres of fuel. Add each time when
filling up with fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
125 ml
2880
12
1581
INJECTION
CLEANER
Cleans contaminated petrol
injection systems, removes carbon,deposits and deposits from
fuel pipes, fuel distributors, injection,and inlet valves --
therefore: ˜ No starting problems and no lean,surging ˜
Smother idling, good throttle response ˜
Low-pollution,,environmentally compatible combustion. Promotes
accurate injector dosing and fuel atomisation: ˜ Your engine
regains its original performance,˜ Fuel consumption is
reduced. Especially suitable for,engines with catalytic
converters.
Operational area: For eliminating problems such as
starting,difficulties, irregular idling, poor throttle
response, performance losses, lean surging,and poor exhaust
values. With a long-term effect lasting 2000 km. When,the
product is added, the tank must be at least 3/4 full. 300 ml
is sufficient for,up to 70 litres of fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
300ml
300ml 300ml 300ml 300ml 5ltr
1512 1400 1400 1400 1400 6
12 20 20 20 20 1
5110 1803 1971 2522 2822 5113
RACING 2T MOTORBIKE
ADDITIVE
Breaks down residues in the
inlet and exhaust channels as well as carburettors. Protects
the fuel system against corrosion. Promotes lower exhaust
values and reduced petrol consumption. Environmentally
compatible. A cleaner engine also means increased engine
performance. Tested for compatibility with catalytic
converters.
Operational area: Suitable for all 2-stroke engines
with mixture or separate lubrication. 5 ml is sufficient for
up to 1 litre of fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
250 ml
1728
6
1582
PETROL SYSTEM
TREATMENT
Highly effective, protective
combination of agents for all petrol injection systems.
Protects against wear, corrosion and fuel residues.
Operational area: Preventative treatment of motor
vehicles with petrol injection systems. 300 ml is sufficient
for up to 75 litres of fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
300ml
1218
6
5108
mtx CARBURETTOR
CLEANER
Breaks down residues in the
carburettor, on valves, sparking plugs and particularly the
combustion chamber. Keeps the engine clean. Cleaner engines
produce a lower level of pollutants, use less petrol and are
kinder to the environment. Tried and tested in turbochargers
and catalytic converters. Engine tests have been carried out
by leading fuel institutes. Promotes exhaust values in line
with the exhaust-emission check. Protects the components of
the fuel system against corrosion, even during long periods of
non-use.
Operational area: Used as an additive for the fuel
of all 2-stroke and 4-stroke petrol engines, especially for
motor vehicle engines. Also used for small engines for ships
and industry. With a longterm effect for 2000 km. When the
product is added, the tank must be at least 3/4 full. 300 ml
is sufficient for up to 70 litres of fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
300ml 300ml 300ml 300ml 50ltr
1512 1400 1400 1400 6
12 20 20 20 1
5100 1818 2507 2810 5102
VALVE
CLEAN
Engines are subjected to
extreme loads even under normal driving conditions such as
town and commuter traffic, short journeys and traffic jams.
This sort of use causes the build-up of deposits on valves, in
the combustion chamber and in the carburettor. Valve Clean
cleans valves, injection systems, intakes, carburettors and
combustion chambers and keeps them clean. Clean engines save
fuel. Promotes optimum engine performance and fuel
utilisation. The combustion produces a lower level of
pollutants and the engine is spared. Protects against
corrosion and carburettor icing. Tried and tested in
turbo-chargers and catalytic converters.
Operational area: For all petrol engines. Suitable
for standard and high-octane petrol, leaded and unleaded. 150
ml is sufficient for up to 75 litres of fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
150ml 150ml 150ml 150ml 205ltr
2052 1 1980 1980
12 20 20 20
1014 2952 2503 2809 2535
SPEED PETROL
ADDITIVE
Speed Petrol Additive consists
of a combination of ash-free, self-lubricating active agents
which has been formulated according to the latest fuel and
additive technology. This product is characterised by its
excellent cleaning and material protection properties.
Operational area: For successful results, Speed
Petrol Additive is added to the fuel of all 2-stroke and
4-stroke petrol engines. This applies to engines in motor
vehicles and ships and industrial applications. As well as
being used while the engine is running, Speed Petrol Additive
can be used for preserving the components of the fuel system
when the engine is decommissioned for long periods.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
1ltr
630
6
5105
PETROL
STABILISER
A combination of agents for
protection against corrosion, deposits and fuel ageing.
Facilitates problem-free overwintering of lawn-mowers, chain
saws, two-wheeled vehicles and other 2-stroke and 4-stroke
petrol engines.
Operational area: Storage and overwintering of
petrol-powered lawnmowers and motorised equipment. 25 ml
preserves 5 litres of fuel.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
250ml 250ml
1728 1728
6 6
5107 2817
LEAD
SUBSTITUTE
Lead is already banned in
petrol in many countries in Europe. Now, older petrol engines
with valve seats which require leaded petrol for lubrication
are threatened with: ˜ higher valve-seat wear ˜ noticeable
loss in compression, i. e. lower engine performance ˜ or even
engine damage. Lead Substitute facilitates lead-free operation
of passenger motor vehicles. Lubricates and protects
non-hardened valve seats against wear. Therefore protects
against engine damage. For optimum compression.
Operational area: Suitable for all petrol engines
which previously required leaded petrol. Added after filling
up with fuel. Mixture ratio 1 : 1000. 250 ml is sufficient for
250 litres of lead-free petrol (Standard EN 228).
Container Contents
Pallet Unit
Packaging Unit
Part- No.
250ml 250ml 250ml 50ltr
1728 1728 1728 6
12 12 12 1
1010 1838 2819 2142
OCTANE
PLUS
is designed to improve gasoline
engine operation in areas where the octane rating (RON) is too
low and causes engine knock, pinging, overheating and other
problems associated with lowoctane gasoline. Raises the octane
rating by up to 4 points. Contains no lead or other
metallic-compounds that could harm catalytic converters.
Operational area: As additive treatment for all
gasoline powered cars to increase performance and reduce
problems of low-octane fuels. One can treats up to 50 l of
gasoline.
Container Contents
Pallet Unit
Packaging Unit
Part- No.
150ml 150ml 150ml 150ml
1980 2052 1980 1980
20 12 20 20
2527 2529 2812 2956
FUEL
PROTECT
This product is designed to
protect all parts of the fuel system of both gasoline and
Diesel cars and trucks against the harmful effects of water
and water-borne contamination. It absorbs and neutralizes
water in the fuel system(tank, fuel lines, carburetion
andinjection parts). It protects against rust, corrosion and
wear caused by rust particles. It prevents icing in fuel
lines, filters and carburetors. It improves cold-start
performance.
Operational area: Recommended for all gasoline in
cars, trucks, buses, stationary and marine engines, storage
tanks. Especially suited for resolving problems caused by
filling with fuel containing excessive water, and those due to
water condensation in the fuel tank. One can treats up to 60 l
of gasoline or Diesel fuel.
.gif){kind=spacer}
